E. John and R. Gettu (2014) “Effect of Temperature on Flow Properties of Superplasticized Cement Paste”, ACI Materials Journal, 111, 67-76.
A. John and E. John (2013), “Study on the partial replacement of fine aggregate using induction furnance slag”, American Journal of Engineering Research (AJER), 01-05.
B. Jacob, A. Balaji, E. John (2013), “Behaviour of concrete structures under fire – a comparative study between IS 456: 2000 and finite element software ANSYS”, American Journal of Engineering Research (AJER),3,62-66.
A. Sukumar and E John (2014), “Fiber Addition and Its Effect on Concrete Strength”, International Journal of Innovative Research in Advanced Engineering (IJIRAE),1,144-149.
B. Johny and E. John (2014), “Study on properties of sustainable concrete using slag and recycled concrete aggregate”, International Journal of Engineering Research & Technology (IJERT),3,68-72.
I. S. Raj and E. John (2014), “Study on properties of air-entrained concrete for masonry blocks” International Journal of Engineering Research & Technology (IJERT), 3, 1367-1370.
G. M. Devi and E. John (2014),” Effect of Re-Dosing Superplasticizer to Regain Slump on Concrete”, International Journal of Innovative Research in Advanced Engineering (IJIRAE),1,139-143.
M. K. Abraham, E. John, B. Paul (2014),” A Study on the Influence of Mineral Admixtures in Cementitious System Containing Chemical Admixtures”, International Journal of Engineering Research and Development,10, 76-82.
S. K. Sam, D. Varkey and E. John (2014),” Self-Compacting Concrete with Recycled Coarse Aggregates”, International Journal of Engineering Research & Technology (IJERT),3,105-107.
S. Sarika, E.John (2015), “A Study on Properties of Reactive Powder Concrete”, International Journal of Engineering Research & Technology (IJERT),Volume 4, Issue 11, 110-113.
M. Najeeb, E. John (2015), “Study on Performance of Prefabricated Ferrocement Slabs,” International Journal of Engineering Research & Development (IJERD), Volume 11, Issue 10, 76-80.
G. Kallungal and E. John (2016), “Optimization of foam concrete masonry blocks”, International Journal of Engineering Research and General Science (IJERGS), Volume 4, Issue 5, 82-106.
S. Bhaskar, M. S. Smitha and E. John (2016), “Relevance of Sea Water as Mixing Water in Concrete”, International Journal of Innovative science, Engineering and Technology (IJIRSET), Volume 5, Issue 9, 17084-17090.
A. Radhakrishnan, A. Das and E. John (2016),“ Effect of Crumb Rubber and Silica Fume in Concrete for Masonry blocks “,International Journal of Innovative science, Engineering and Technology (IJIRSET), Volume 5, Issue 9, 18923-18928.
A. Jacob, E. John (2016), “Mechanical Properties of Glass Fiber Reinforced Concrete Using Recycled Concrete”, International Journal of Innovative science, Engineering and Technology (IJIRSET), Volume 5, Issue 9, 1111-1118.
Sreekumar K. K. et al., (2016), “Study on Correlating Properties of Cement Paste and Concrete”, Journal of Mechanical and Civil Engineering, Volume 13, Issue 5, 66-73.
E. John et al., (2016), “Study on the influence of Mineral Admixtures on aerated lightweight concrete”, International Organisation of Scientific Research, Volume13, Issue 5, Veriosn 1.
L. Thomas and E. John (2017), “Compatibility Of Cement And Water-reducers With Mineral Admixtures – A Review”, International Journal of Science Technology & Engineering (IJSTE), Vol 3, Issue 10, 023.
Aneesamol U. M. et al. (2017), “Study on Optimization and Properties of Foamed Concrete Incorporating Mineral Admixture, International Journal of Science Technology & Engineering, Volume 3, Issue 11, 137-139.
P. B. Pulliattu and E. John (2017), “Study on the Properties of Aerated Concrete Incorporating Fly Ash and Quarry Dust”, International Journal of Science Technology & Engineering, Volume 3, Issue 10, 1-3.
Sarika. R. et al. (2017), “The Effect on the Properties of Aerated Concrete Developed by Partially Replacing Cement with Flyash and Fine Aggregate with Rubber Powder”, Global Research and Development Journal for Engineering, Volume 2, Issue 12, 42-46.
V. Viswam and E. John (2017), “Study on the Effectiveness of Incorporation of Bacteria and Nano materials for Durability in Concrete”, International Journal of Science Technology & Engineering, Volume 3, Issue 11, 71-76.
Dr. E. John et al., (2018), “Engineered cementitious composite (ECC) mix design for link slabs in bridge deck”, International Research Journal of Engineering and Technology (IRJET), Volume: 05 Issue: 03, 1-3.
K. John et al. (2019), “Study on shrinkage properties of concrete with and without mineral admixtures” International Journal of Advance Research, Ideas and Innovations in Technology, volume5, issue 2, 1840-1849.
A. Sidheeq M. S. et al. (2019), “Utilisation of various industrial waste materials as filler in aerated concrete: A review” International Research Journal of Engineering and Technology (IRJET), Volume: 06 Issue: 04, 4274-4277.
B. M. Thomas and E. John (2019), “Optimization of foam volume in foam concrete” International research journal of engineering and technology, Volume 6, Issue 4.
I. S. Raj and E. John (2019), “Evaluation of properties of concrete partially replaced by cement with fly ash”, International Journal of Advanced Research in Engineering and Technology, Volume 10, Issue 1, 223-229.
A. G. Raj, J. S. James, E. John (2020), “Drying shrinkage of concrete containing shrinkage reducing admixtures with and without supplementary cementitious materials”, International Research Journal of Engineering and Technology (IRJET) Volume: 07 Issue: 07, 1600-1608.
Anjana Anna Johncy, Indu Susan Raj, Dr. Elson John (2020), Study on Mechanical Properties of Foam Concrete Incorporating GGBFS and Filler Materials- A review International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 07 Issue: 07, 1506- 1512.
Athira M, Indu Susan Raj, Dr. Elson John, (2020), “Study on aerated concrete blocks”, International Research Journal of Engineering and Technology, Volume: 07 Issue: 07, 1767-1774.
Chinnu Kottackal, Jerison Scariah James, Dr. Elson John (2020), “Study on the effect of SRA on plastic and autogenious shrinkage with and without supplementary cementitious materials- A review”, International Research Journal of Engineering and Technology, Volume: 07 Issue: 07, 1528-1534.
Himadrija K, Indu Susan Raj, Dr. Elson John (2020), “Microstructure and Durability Properties of Foam Concrete”, International Research Journal of Engineering and Technology, Volume: 07 Issue: 07, 1693-1699.
Manu Mohan and Dr. Elson John (2020), “Study on slump retention of ready-mix concrete: A Review”, International Research Journal of Engineering and Technology, Volume: 07 Issue: 07, 1784-1789.
Midhun Mohan, Paul Shaji, Dr. Elson John (2020), “Light Weight Aggregate Concrete using Bottom Ash and Fly Ash”, International Research Journal of Engineering and Technology, Volume: 07 Issue: 07, 1619-1625.
Nanditha S, Indu Susan Raj, Dr. Elson John (2020), “Effect of filler materialsin aerated concrete: A Review”, International Research Journal of Engineering and Technology, Volume: 07 Issue: 07, 1613-1619.
Saranya K P, Dr. Elson John (2020), “Study on the influence of accelerated curing methods on the properties of concrete”, International Research Journal of Engineering and Technology, Volume: 07 Issue: 07, 1626-1632.
Aiswarya T J, Indu Susan Raj and Dr. Elson John (2021), “Study on aerated masonry blocks- A review”, International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 08 Issue: 06, June 2021.
Angel Rose1 et al. (2021), “A review on the influence of shrinkage reducing admixtures on concrete”, Sustainability, Agri, Food and Environmental Research, (ISSN: 0719-3726), 10(X), 2022: http://dx.doi.org/.
Divyasree S and Dr. Elson John (2021), “A review on ultrahigh performance concrete”, International Research Journal of Engineering and Technology, Volume: 08 Issue: 06, June 2021.
Goldy Prince, Elson John and Jessymol George (2021), “A review on performance – based specification of durable concrete”, Sustainability, Agri, Food and Environmental Research, (ISSN: 0719-3726), 10(X), 2022: http://dx.doi.org/.
Jerin Joy and Elson John (2021), “A performance approach for durability index”, International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 08 Issue: 06|, June 2021.
Jilty M Varghese and Elson John (2021), “A review on concrete durability and performance ceased specification”, International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 08 Issue: 06, June 2021.
Jinu Darsh M.S., Indu Susan Raj and Dr. Elson John (2021), “Review on properties of GGBFS and fly ash incorporated aerated concrete with filler materials”, Sustainability, Agri, Food and Environmental Research, (ISSN: 0719-3726), 10(X), 2022: http://dx.doi.org/.
Merin Mathew1, Indu Susan Raj and Dr Elson John (2021), “Study on Properties of GGBFS and Flyash incorporated Foam Concrete with Filler Materials-A review”, International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 08 Issue: 06, June 2021.
Aleena Lukose, Anju Paul, Dr. Elson John (2022), “Study on the Properties of Ultra-High-Performance Concrete-A Review”, International Research Journal of Engineering and Technology (IRJET), Volume: 09 Issue: 07, July 2022.
Sneha Elsa Cheriyan, Indu Susan and Elson John (2022), “Durability and Microstructure studies of Plastic Incorporated Light Weight Concrete: A Review”, International Journal for Research in Engineering Application & Management, Volume 8, Issue 1, April 2022, Pages 253-258.
Arya Murali, Indu Susan Raj, Dr. Elson John (2022), “Durability and Microstructure Studies of Rubber Incorporated Light Weight Concrete: A Review”, International Journal for Research in Engineering Application & Management, Vol-08, Issue-01, APR 2022.
Anitta Paul, Anju Paul, Dr. Elson John (2022), “Study on the Properties of High-Performance Concrete-A Review”, International Research Journal of Engineering and Technology (IRJET), Volume: 09 Issue: 06, June 2022.
Chris Philip, Jerison Scariah James, Dr. Elson John (2022), “Shrinkage properties of cement concrete incorporated with different supplementary cementitious materials – A review”, International Research Journal of Engineering and Technology (IRJET), Volume: 09 Issue: 06, June 2022.
Anly Saju, Akhila, Dr. Elson John (2022), “Effect of supplementary cementitious materials on the corrosion of reinforced concrete”, International Research Journal of Engineering and Technology (IRJET), Volume: 09 Issue: 06, June 2022.
Ancia Cherian, Jerison Scariah James, Dr. Elson John (2022), “Shrinkage characteristics of cement concrete with various supplementary cementitious materials and fibres – A review”, International Research Journal of Engineering and Technology (IRJET), Volume: 09 Issue: 06, June 2022.
Suhana Subair, Anju Paul, Dr. Elson John (2023), “The Effect of Fibre in Ultra High-Performance Concrete (UHPC): A Review”, International Journal of Research in Engineering and Science (IJRES), Volume 11 Issue 6, June 2023, PP. 141-151
Dr. Elson John, Anju K Paul, Anjana Krishnan (2022), “A review on the composition, microstructure and properties of Ultra High performance Concrete”, International Journal of Research in Engineering and Science (IJRES), Volume 6, Issue 7, Ver. I, PP. 40-45.
International conference papers:
1. R. Gettu, Jayasree C., E. John, Bhaskar S., B. Eshete and Vinayak S., “More sustainable concrete technology through the effective use of superplasticizers”, Third International Conference on Sustainable Construction Materials and Technologies, Kyoto, Japan, Japan Concrete Institute, 2013.
International conference papers:
2. B. Johny, M. V. George and E. John, “Study of properties of sustainable concrete using slag and recycled coarse aggregate”, International Conference on Structural engineering and construction Management, M. A. College of Engineering Kothamangalam, 2016.
International conference papers:3. A. John and E. John, “Study on the partial replacement of fine aggregate with quarry dust”, International Conference on Structural engineering and construction Management, M. A. College of Engineering Kothamangalam, 2016.
International conference papers:4. Sarika S. and E. John, “Superplasticizer saturation dosage for reactive powder concrete using Marsh cone test”, International Conference on Structural engineering and construction Management, M. A. College of Engineering Kothamangalam, 2016.
International conference papers:
5. A. Sukumar and E. John, “Study on use of steel fibre and basalt mesh in concrete”, International Conference on Structural engineering and construction Management, M. A. College of Engineering, Kothamangalam, 2016.
National conference papers:
1. A. John, E. John, “Study on the partial replacement of fine aggregate using induction furnace slag”, CUSAT National Conference on Recent Advances in Structural Engineering RASE 2013.
National conference papers:
2. B. Jacob, A. Balaji, E. John , “Behaviour of concrete structures under fire – a comparative study between IS 456: 2000 and finite element software ANSYS”, CUSAT National Conference on Recent Advances in Structural Engineering RASE 2013.
National conference papers:
3. Tom et al. “Study on the Properties of Aerated Cement Paste Incorporating Fly Ash and PVC Granules” National conference on recent emerging advancements in Civil Engineering and Technology, APRIL 2018, Vidhya Academy of Science and Technology, Trissur.
National conference papers:
4. Arya E. K. et al., “Study on the Effectiveness of Shrinkage Reducing Admixtures on Plastic Shrinkage of Concrete”, SECON’19, April 2018, Federal Institute ot Technology, Angamaly.
National conference papers:
5. Sreerekaha S. and E. John, “Evaluation of early age hydration behaviour of cementitious systems by using temperature sensors”, National conference on developments and innovations in civil engineering, April 2019, MBCCET Kuttikanam.
